Thickness: 3/4" inch solid wood

Board Length: 6' average, no shorter than 2' or longer than 10'

Board Width: 3"-7" random widths

Tongue & Groove: both the sides and ends are matched

Refinishing: the wood can be screened and recoated, but not sanded (the word screened essentially means a mild buffing)

Installation: nail down

Area: On grade, above grade, residential and commercial

Radiant heat: can be used over radiant heat

Acclimation time: A 14-day at site acclimation is ideal

Maintenance: A spray bottle of water and hardwood flooring solution, used with a dry mop for best results, do not pour water on floor directly

Available stains: Plaza Hickory, Spanish Peaks Walnut, Mesa Verde Walnut, Black Canyon Walnut, Desert Walnut, Alamo White Oak, Tabla Rosa Cherry, Capistrano Heart Pine, Brazilian Cherry, Jatoba Madrid, Raven’s Peak Hickory, Malibu Maple

Custom Staining Available - Call for more information

Finish: 1 coat of stain, 3 coats of polyurethane

Cut: Plain sawn

Core: Solid 3/4" inch all the way through




Thickness: 5/8" inch thick

Board Length: 7' 2 5/8" long for 5 1/2” face width. Whole sizes 3” - 6” widths average 4’ - 6’ lengths.

Board Width: 3”, 4”, 5”, 5 1/2", 6” width

Tongue & Groove: both the sides and ends are matched

Refinishing: the wood can be screened and recoated, but not sanded (the word screened essentially means a mild buffing)

Installation: floating, nail or direct glue depending upon face widths chosen

Area: On grade, above grade, below grade, residential and commercial, vapor barrier recommended in floating applications

Radiant heat: can be used over radiant heat

Acclimation time: install when packaging is opened

Maintenance: A spray bottle of water and hardwood flooring solution, used with a dry mop for best results, do not pour water on floor directly

Available stains: Plaza Hickory, Spanish Peaks Walnut, Mesa Verde Walnut, Black Canyon Walnut, Desert Walnut, Alamo White Oak, Brazilian Cherry, Malibu Maple, Jatoba Madrid, Raven’s Peak Hickory

Custom Staining Available - Call for more information

Finish: 1 coat of stain, 3 coats of polyurethane

Cut: Plain sawn

Core: 1/8” Veneer wear layer, 3-ply product